- For Sale
- About us
- My Account
- Contact Us
Please choose from the following drop downs.
Start at step 1 and work your way down.
This machine is unique in allowing the piston and the internal sleeves to be replaced or or to replace the seals without loosening the tie rods.
A new flow diverter valve in the input swivel that regulates oil-flow and working pressure independent from the carriers output. It brings constant reliability to the hammers.
A new hydraulic or manual adjuster allows for setting of the pistons stroke length to suit different jobsite applications.
A new self locking tightening system for the tie rods gives them more elasticity and strength.
A new outer case, completely manufactured in high resistance steel, also has longer and wider surface side guides in the seal for the breaker for minimizing the vibrations to transferring to the case.
There is also an innovative vibrations-limiting system upper buffer.
An option is available to pressurize the stroke chamber for tunneling or under water applications.
In addition, a special dust protection seal has been installed in the lower part of the breaker in order to stop any debris or dirt from entering.
Make SOCOMEC S.P.A.
Model MDO 2300 TS
Energy per stroke 6000 Joules
Maximum Frequency 460-630 s/min
Maximum oil flow 220 l/min
Maximum working pressure 140 bar
Maximum exhaust back pressure 10 bar
Accumulator charging pressure 35 bar
Calibration pressure of the hydraulic system maximum valve 200 bar
Hammer weight in working conditions 2400 kg
Tool weight 150 kg
Pin retainer tool weight 7.5 kg
Delivery pipe diameter 1″ 1?4 G
Exhaust pipe diameter 1″ 1?4 G
Tool diameter 152 mm
Hammer height with tool without adapting plate 2667 mm
Maximum length of the tool inner guide 575 mm
Maximum diameter in front and back the tool bushings 156.5 mm
Maximum oil temperature in the tank 80 degrees celius
Maximum absorbed power 51 KW